Creality 3D CR-10S Upgraded 3D Printer with EU Plug - Orange

Price : USD
US$ 727.83
Quantity :
Color :

Add to wish list
Product Updates
Price Match
Report Error
For bulk order or wholesale business,please contact us!
Product Information

Processing Time

Typical Processing Time: 1 - 5 business days

Shipping Time

Regist airmail and airmial 11-25 depends on country
Express shipping 3-5 business day
Delivery to over 100 country!

Payment Methods:

CR-10S Upgraded 3D Printer with EU Plug - Orange


.100% brand new and high quality.
.Made of superior material, durable to use.
.Z-axis double lead screw design: lift more stable, higher printing accuracy.
.Creality3d V2.1 motherboard: new upgrade, quality assurance, industrial process, 200 hours of continuous printing without pressure.
.Resume printing while power-off: The motherboard is fully upgraded and supports continuous power failure, which effectively reduces model scrapping caused by power outages.
.Broken material detection: When the filament runs out or disconnected, the printer will automatically suspended to ensure the model can be smoothly printed.
.Large build size: Offer you  more opportunity  to image and create the things you need while ensuring accuracy and quality.
.Split type design: The electronic control host and the mechanical structure are separated, develop your mind, help create a variety of printers at will.
.Shipment of the kit: Solve the problem of large-kit transportation. Installation takes only 5 minutes.
.Linear pulley system: patented technology, V-profile + precision pulley with perfect, running more smoothly, more wear-resistant. Effectively reduce noise.
.MK10 Extrusion Mechanism: A brand-new patented infrastructure that effectively reduces the risk of plugging and poor spillage, and can print almost all consumables on the market.


.Color: Orange
.Material: Aluminum Frame
.Frequency: 50/60HZ (the printer's power supply can switch automatically)
.Molding Technology:FDM(Fused Deposition Molding)
.Bed Temp:≦75℃ for Normal
.Quantity of Nozzles: One
.Printing Layer Thickness: 0.1mm-0.4mm
.Printing Size:300*300*400mm
.Maximum Nozzle Temperature: 250℃
.Nozzle Diameter:Standard 0.4mm, can be in 0.2/0.3/0.6/0.8mm
.Software Language: English
.Maximum Speed of Travel: 180mm/s
.Printing Speed: ≤100mm/s
.Normal Printing Speed: 60mm/s
.Printing Software:Create 3d slicing software, compatible for Cura, Simplify3D
.Rated Voltage: 110V/220V (the printer's power supply can switch automatically)
.Memory Card Offline Print: Online or U Disk Offline
.Output Voltage: 12V
.File Format:STL/OBJ/G-Code
.Rated Power: 270W
.Printing Material: PLA, Timber, Flexible Glue, Carbon Fiber, Gold-containing Material, etc.
.Product Dimensions: 60*59*61cm
.Product Weight: 9000g
.Package Dimensions: 63.5*52.5*27cm
.Package Weight: 13800g
.Packing: Yellow Carton Box + Internal Foam Fixation

Package Content:

.1 x Bottom Kit
.1 x Rack Gantry Kit
.1 x Crate
.1 x Tool Box

*Expedited shipping can not be used for PO Box addresses
Shipping From EU, USA and AU Local Warehouses:
EU Warehouses UK 3-6 business days
Other EU countries 7-10 business days
USA Warehouse USA 3-6 business days
Other American countries 7-10 business days
AU Warehouse Australia 5-8 business days



Post Your Review
Average rating:
5.00 (based on 1 reviews)
  • 5 Star 1 (100%)
  • 4 Star 0 (0%)
  • 3 Star 0 (0%)
  • 2 Star 0 (0%)
  • 1 Star 0 (0%)
write a review
Most Helpful Reviews
It's a 5 star unit as long as you know what you're getting into.
Ordered it as a backup for my CR-10 S4. Took about 20-30 minutes to put together and discovered I had a warped glass plate. Not docking a star for that since I knew going into the purchase I'd likely receive a warped glass plate. Took a bit longer than normal to level the bed and tram the print head due to the warped plate but within 60 minutes of opening the box I started a 14hr print which finished beautifully...on the warped glass plate, no less. Tips: The positioning of the spool holder is atrocious and will cause the control box to tip over into the printer the first time the printer encounters a kink in the filament. Re-locate the spool to the top crossbar and print the feed guide from thingiverse and you wont run into that issue any longer. Print a replacement for the control knob on the control box. Print larger bed leveling thumbscrews (available on thingiverse) to make leveling the bed FAR easier. Mark 100mm of filament from the filament out sensor to the spool, then use the control box to preheat the extruder and extrude 100mm of filament. If the 100mm mark on the filament does not reach the hole on the filament out sensor, you are under-extruding and you will need to adjust your slicer settings.
× Upload the video
Input video link code :
[ eg: ]
Title :
Tag : (Please use SPACE to separate the tags)
Introduction :
Agree to Lightake Post Rules
* Never include the content of political, violent, pornographic and so on.
* Never make any offence to anyone. * Never offend any copyrights.
× Post your images
Notes:We support:*.jpg|*.png|*.gif, which should be within 2M
Title :
Tag : (Please use SPACE to separate the tags)
Introduction :
Agree to Lightake Post Rules
* Never include the content of political, violent, pornographic and so on.
* Never make any offence to anyone. * Never offend any copyrights.
× Submit you product review
Tip : Click on the stars will be able to score a
Quality :
Price :
Appearance :
Average Rating :
Title : (Summarize your experience with this product in one sentence)
Review : (Share your throughts or experience of using this product with other customers)
Agree to Lightake Post Rules
Footer Tip
© 2008-2019 LIGHTAKE