SKU: 20170829218 ×1

2Pcs Worker Aluminum Alloy Modified Flywheel Wheel(matching for oblique flywheel cage) Toy Accessories for Nerf STF/CS-18(Diamond Pattern) - Blue

Features:

.100% brand new and high quality.
.Perferred aluminum alloy material that is rustproof, abrasion proof and durable to use.
.Unique diamond-pattern effectively increase the friction between bullet and flywheel to reduce the degradation of energy and advance the speed of shootting out.
.As keeping the high shooting accuracy, the range and speed of the bullet up 1.5 times.
.High-end modified flywheel make your shooting fast, accurately and powerfully, which provides best game experience.
.Flywheel wheel is suitable for electric repeating gun; Type for Nerf CS-18 N-Strike Elite Rapidstrike, Nerf N-Strike Elite Stryfe Blaster, etc.

Usage:  Remove the gun cover and replace the original flywheel cage to the Worker oblique flywheel cage(Additional purchase), then to recombination; Diamond pattern flywheel is only suitable for using in the oblique flywheel cage, not suitable for flat flywheel cage; The product may need to be trimmed off some the edges that block the flywheel run, just following the instructions; The product is suitable for people over 14 years old.

Specifications:

.Color: Blue
.Material: Aluminum Alloy
.Product Size: 3.5*3.5*1.7cm
.Product Weight: 18g
.Package Dimensions: 10*6*3cm
.Package Weight: 36.5g
.Packing: Carton Box

Package Content:

.2 x Flywheel Wheels
--------------------------------------------------------------------
SKU: 20170829220 ×1

Worker Aluminum Alloy Modified Oblique Flywheel Cage Set Toy Accessories for Nerf STF/CS-18 - Blue

Features:

.100% brand new and high quality.
.Perferred aluminum alloy material that is rustproof, abrasion proof and durable to use.
.Slope design of the mouth of bullets feeding can be used to correct the tail of the bullet and improve the accuracy and accuracy.
.The flywheel cage can be used with Worker diamond pattern flywheel and large power motor, which works best.
.High-end modified flywheel cage makes your shooting fast, accurately and powerfully, which provides best game experience.
.Flywheel cage is suitable for electric repeating gun; Type for Nerf CS-18 N-Strike Elite Rapidstrike, Nerf N-Strike Elite Stryfe Blaster, etc.
.The product is suitable for people over 14 years old.

Specifications:

.Color: Blue
.Material: Aluminum Alloy
.Product Size: 7.7*2.1*4.5cm
.Product Weight: 67g
.Package Dimensions: 10*6*3cm
.Package Weight: 85g
.Packing: Carton Box

Package Content:

.1 x Blue Oblique Flywheel Cage
.8 x Motor Set Screws
--------------------------------------------------------------------
SKU: 170916313 ×1

Worker 20CM Plastic Threaded Pipe Modified Barrel Extension for Nerf - Orange

Features:

.100% brand new and high quality.
.Made of high quality PC material that has good finish, wear resistant and heat resistant.
.This thicker pipe is not only suitable to replace the original one, but also can be used for modification.
.Can be cut off as required to meet you various needs.
.Threaded design is beneficial to manage fast flowing airflow in pipe while shooting, improve foam bullets' precision.
.Can be fixed with glue at appropriate location of the pipe, make it not easy to come off.
.Applicable to Nerf N-Strike Elite Stryfe Blaster and N-Strike Elite Retaliator Blaster.

Specifications:

.Color: Orange
.Material: PC
.Product Dimensions: 20*1.9*1.9cm
.Product Weight: 12.6g
.Package Dimensions: 20.5*2.4*2.4cm
.Package Weight: 13.6g
.Packing: OPP Bag

Package Content:

.1 x Threaded Pipe
--------------------------------------------------------------------
SKU: ×1

Worker Aluminum Alloy Modified Aluminium Tube Toys for Nerf N-Strike Elite Stryfe Blaster Nerf CS-18 N-Strike Elite Rapidstrike - Silver

Features:

.100% brand new and high quality.
.Perferred aluminum alloy material that is rustproof, abrasion proof and durable to use.
.High strength aluminium tube for 1mm thick, 20cm in length,  and 1.5cm inside diameter, just fit for it and the bullets are not easy to bend.
.The aluminium tube must be used with Worker flywheel cage, which works best.
.High-end modified aluminium tube makes your shooting fast, accurately and powerfully, which provides best game experience.
.Type for Nerf N-Strike Elite Stryfe Blaster，Nerf CS-18 N-Strike Elite Rapidstrike, etc; The product is suitable for people over 14 years old.

Specifications:

.Color: Silver
.Material: Aluminum Alloy
.Product Size: 20*1.5*1.5cm
.Product Weight: 36g
.Package Dimensions: 20.7*2.2*2.2cm
.Package Weight: 40g
.Packing: Bag

Package Content:

.1 x Aluminium Tube
--------------------------------------------------------------------
SKU: ×1

Worker Aluminum Alloy Modified Aluminium Tube Toys for Nerf N-Strike Elite Stryfe Blaster Nerf CS-18 N-Strike Elite Rapidstrike - Silver

Features:

.100% brand new and high quality.
.Perferred aluminum alloy material that is rustproof, abrasion proof and durable to use.
.High strength aluminium tube for 1mm thick, 20cm in length,  and 1.5cm inside diameter, just fit for it and the bullets are not easy to bend.
.The aluminium tube must be used with Worker flywheel cage, which works best.
.High-end modified aluminium tube makes your shooting fast, accurately and powerfully, which provides best game experience.
.Type for Nerf N-Strike Elite Stryfe Blaster，Nerf CS-18 N-Strike Elite Rapidstrike, etc; The product is suitable for people over 14 years old.

Specifications:

.Color: Silver
.Material: Aluminum Alloy
.Product Size: 20*1.5*1.5cm
.Product Weight: 36g
.Package Dimensions: 20.7*2.2*2.2cm
.Package Weight: 40g
.Packing: Bag

Package Content:

.1 x Aluminium Tube
--------------------------------------------------------------------
SKU: ×1

Worker Aluminum Alloy Modified Aluminium Tube Toys for Nerf N-Strike Elite Stryfe Blaster Nerf CS-18 N-Strike Elite Rapidstrike - Silver

Features:

.100% brand new and high quality.
.Perferred aluminum alloy material that is rustproof, abrasion proof and durable to use.
.High strength aluminium tube for 1mm thick, 20cm in length,  and 1.5cm inside diameter, just fit for it and the bullets are not easy to bend.
.The aluminium tube must be used with Worker flywheel cage, which works best.
.High-end modified aluminium tube makes your shooting fast, accurately and powerfully, which provides best game experience.
.Type for Nerf N-Strike Elite Stryfe Blaster，Nerf CS-18 N-Strike Elite Rapidstrike, etc; The product is suitable for people over 14 years old.

Specifications:

.Color: Silver
.Material: Aluminum Alloy
.Product Size: 20*1.5*1.5cm
.Product Weight: 36g
.Package Dimensions: 20.7*2.2*2.2cm
.Package Weight: 40g
.Packing: Bag

Package Content:

.1 x Aluminium Tube
--------------------------------------------------------------------
SKU: ×1

Worker F10555 3D Printing No.195 Motor Cover for Nerf Stryfe 180 Electrical Machinery - Orange

Features:

.100% brand new and high quality.
.This product is made of environmental PLA material, should be protected from heating, direct sunlight area or other high temperature environments to avoid deformation because of PLA material's low melting point.
.The 3D printing product with printing texture on surface is not smooth and solid like injection mold; it is lightweight, updated rapidly and no smell of plastic.
.The motor cover is fitted with a nerf stryfe mounted on a 180 motor. Since the 180 motor is larger than the 132 motor, it would protrude when installed on the nerf stryfe. Therefore, the original battery cover is not suitable and needs to be dismantled and then replaced again. 195 No. 180 motor STF motor cover, it could be perfect fit
.Suitable for crowd over 14 years old
.Note: The modification requires a little hands-on ability, modification is risky, players need to carefully consider

Specifications:

.Color: Orange
.Material: PLA
.Prouct Size: 6.4*5.8*0.9cm
.Product Weight: 8g
.Package Dimensions: 8*12*3cm
.Package Weight: 10.73g
.Packing: Box

Package Content:

.1 x Motor Cover
.4 x Screw
--------------------------------------------------------------------
SKU: ×1

Worker F10555 3D Printing No.195 Motor Cover for Nerf Stryfe 180 Electrical Machinery - Orange

Features:

.100% brand new and high quality.
.This product is made of environmental PLA material, should be protected from heating, direct sunlight area or other high temperature environments to avoid deformation because of PLA material's low melting point.
.The 3D printing product with printing texture on surface is not smooth and solid like injection mold; it is lightweight, updated rapidly and no smell of plastic.
.The motor cover is fitted with a nerf stryfe mounted on a 180 motor. Since the 180 motor is larger than the 132 motor, it would protrude when installed on the nerf stryfe. Therefore, the original battery cover is not suitable and needs to be dismantled and then replaced again. 195 No. 180 motor STF motor cover, it could be perfect fit
.Suitable for crowd over 14 years old
.Note: The modification requires a little hands-on ability, modification is risky, players need to carefully consider

Specifications:

.Color: Orange
.Material: PLA
.Prouct Size: 6.4*5.8*0.9cm
.Product Weight: 8g
.Package Dimensions: 8*12*3cm
.Package Weight: 10.73g
.Packing: Box

Package Content:

.1 x Motor Cover
.4 x Screw
--------------------------------------------------------------------
SKU: ×1

Worker F10555 3D Printing No.195 Motor Cover for Nerf Stryfe 180 Electrical Machinery - Orange

Features:

.100% brand new and high quality.
.This product is made of environmental PLA material, should be protected from heating, direct sunlight area or other high temperature environments to avoid deformation because of PLA material's low melting point.
.The 3D printing product with printing texture on surface is not smooth and solid like injection mold; it is lightweight, updated rapidly and no smell of plastic.
.The motor cover is fitted with a nerf stryfe mounted on a 180 motor. Since the 180 motor is larger than the 132 motor, it would protrude when installed on the nerf stryfe. Therefore, the original battery cover is not suitable and needs to be dismantled and then replaced again. 195 No. 180 motor STF motor cover, it could be perfect fit
.Suitable for crowd over 14 years old
.Note: The modification requires a little hands-on ability, modification is risky, players need to carefully consider

Specifications:

.Color: Orange
.Material: PLA
.Prouct Size: 6.4*5.8*0.9cm
.Product Weight: 8g
.Package Dimensions: 8*12*3cm
.Package Weight: 10.73g
.Packing: Box

Package Content:

.1 x Motor Cover
.4 x Screw
--------------------------------------------------------------------
SKU: ×1

Worker 180 Motor Kit for Nerf Stryfe Nerf CS-18 N-Strike Elite Rapidstrike Electric Transmitter

Features:

.100% brand new and high quality.
.Small motor has large power, could quickly start launch, continuous high speed rotation, rotate speed is 43000 rpm, locked rotor torque is 60g-cmc and locked rotor current is 17.5A, starting voltage 11.1V to 14.8V
.Quick start launch, sustained steady muzzle velocity during continuous launch
. The torque of the 180 motor is 760, which is much larger than the 280 torque of the 130 motor and the 480 torque of the 132 motor. The torque is mainly to improve the continuous performance under the condition of constant firing speed. Unlike 132 motors and 130 motors, the range of the bullets was significantly reduced after the second and third rounds. And also has the advantage of quick start; products with matching micro-switches, modified wire, modified wire could improve power supply efficiency, improve motor power
.This ket is suitable for Nerf Stryfe and Nerf CS-18 N-Strike Elite Rapidstrike and more Electric Transmitter
.It needs to be used together with the worker's metal modified flywheel. The size of the 180 motor is 4.7cm*2cm*1.5cm, which is slightly larger than the size of the 132. When installing, you may need to remove the original motor cover and replace it with a new suitable motor cover
.Suitable for crowd over 14 years old
.Note: The modification requires a little hands-on ability, modification is risky, players need to carefully consider

Specifications:

.Color: As Shown
.Material: Electronic Components + Metal + Copper Wire Ring + Plastic
.Prouct Size: 4.7*2*1.5cm
.Product Weight: 85g
.Package Dimensions: 10*6*3cm
.Package Weight: 96.76g
.Packing: Carton Box

Package Content:

.2 x 180 Motor
.1 x Wire Rod
.1 x Microswitch
--------------------------------------------------------------------
SKU: ×1

Worker 180 Motor Kit for Nerf Stryfe Nerf CS-18 N-Strike Elite Rapidstrike Electric Transmitter

Features:

.100% brand new and high quality.
.Small motor has large power, could quickly start launch, continuous high speed rotation, rotate speed is 43000 rpm, locked rotor torque is 60g-cmc and locked rotor current is 17.5A, starting voltage 11.1V to 14.8V
.Quick start launch, sustained steady muzzle velocity during continuous launch
. The torque of the 180 motor is 760, which is much larger than the 280 torque of the 130 motor and the 480 torque of the 132 motor. The torque is mainly to improve the continuous performance under the condition of constant firing speed. Unlike 132 motors and 130 motors, the range of the bullets was significantly reduced after the second and third rounds. And also has the advantage of quick start; products with matching micro-switches, modified wire, modified wire could improve power supply efficiency, improve motor power
.This ket is suitable for Nerf Stryfe and Nerf CS-18 N-Strike Elite Rapidstrike and more Electric Transmitter
.It needs to be used together with the worker's metal modified flywheel. The size of the 180 motor is 4.7cm*2cm*1.5cm, which is slightly larger than the size of the 132. When installing, you may need to remove the original motor cover and replace it with a new suitable motor cover
.Suitable for crowd over 14 years old
.Note: The modification requires a little hands-on ability, modification is risky, players need to carefully consider

Specifications:

.Color: As Shown
.Material: Electronic Components + Metal + Copper Wire Ring + Plastic
.Prouct Size: 4.7*2*1.5cm
.Product Weight: 85g
.Package Dimensions: 10*6*3cm
.Package Weight: 96.76g
.Packing: Carton Box

Package Content:

.2 x 180 Motor
.1 x Wire Rod
.1 x Microswitch
--------------------------------------------------------------------
SKU: ×1

Worker 180 Motor Kit for Nerf Stryfe Nerf CS-18 N-Strike Elite Rapidstrike Electric Transmitter

Features:

.100% brand new and high quality.
.Small motor has large power, could quickly start launch, continuous high speed rotation, rotate speed is 43000 rpm, locked rotor torque is 60g-cmc and locked rotor current is 17.5A, starting voltage 11.1V to 14.8V
.Quick start launch, sustained steady muzzle velocity during continuous launch
. The torque of the 180 motor is 760, which is much larger than the 280 torque of the 130 motor and the 480 torque of the 132 motor. The torque is mainly to improve the continuous performance under the condition of constant firing speed. Unlike 132 motors and 130 motors, the range of the bullets was significantly reduced after the second and third rounds. And also has the advantage of quick start; products with matching micro-switches, modified wire, modified wire could improve power supply efficiency, improve motor power
.This ket is suitable for Nerf Stryfe and Nerf CS-18 N-Strike Elite Rapidstrike and more Electric Transmitter
.It needs to be used together with the worker's metal modified flywheel. The size of the 180 motor is 4.7cm*2cm*1.5cm, which is slightly larger than the size of the 132. When installing, you may need to remove the original motor cover and replace it with a new suitable motor cover
.Suitable for crowd over 14 years old
.Note: The modification requires a little hands-on ability, modification is risky, players need to carefully consider

Specifications:

.Color: As Shown
.Material: Electronic Components + Metal + Copper Wire Ring + Plastic
.Prouct Size: 4.7*2*1.5cm
.Product Weight: 85g
.Package Dimensions: 10*6*3cm
.Package Weight: 96.76g
.Packing: Carton Box

Package Content:

.2 x 180 Motor
.1 x Wire Rod
.1 x Microswitch
--------------------------------------------------------------------